Polaris 2012 FS IQ WideTrak Bedienungsanleitung PDF herunterladen (Seite 129)

125

MAINTENANCE

Track Tension

4. Check for specified slack between the wear surface of the track clip

and the plastic rail slide.

If the track needs adjustment:

5. Loosen the rear idler shaft bolt.

6. Loosen the lock nuts.

7. Tighten or loosen the track adjusting screws as necessary to provide

equal adjustment on both sides of the track.

8. Repeat the measurement on the other side of the track.

Tip: Check more frequently when the snowmobile is new.

9. Start the engine and slowly rotate the track at least five revolutions.

Let the track come to a stop (do not apply brakes).

10. Check track alignment (see page 126) and adjust as necessary.

11. Tighten the lock nuts.

12. Tighten the idler shaft bolts. Torque to 35 ft. lbs. (47.5 Nm).

Idler Shaft

Bolt

Adjusting

Screw

Lock

Nut

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 159 160

Keine Kommentare

Polaris 2012 FS IQ WideTrak Bedienungsanleitung Seite 129